Shredder Use Raiders

Shredder Use Raiders

In our daily life, in our work, we will inevitably use paper shredders. How to use the paper shredder can better improve our efficiency, so that we can make full use of our working time in the workplace and do more things in the limited time. This is a knowledge, so today we are here To bring you a detailed paper shredder use Raiders.

1. User Guide:

The paper shredder is very simple to use and has low environmental requirements. In the paper shredder, all have automatic switch function, as long as the paper is placed at the paper inlet, the paper cutter will automatically rotate to roll the paper in and shred it. When the machine is running and finds that there is no need to shred, You can press the "stop/reverse" button, and the shredder will eject the paper upwards to avoid greater losses

Periodically oil the cutting gear to reduce wear, remove dirt that has accumulated in the blades, and replace full shredded boxes.

Try to avoid continuous use for more than 10-15 minutes, and avoid paper capacity exceeding the maximum limit.

Pay attention to dryness, do not put wet paper into the shredder, so as not to rust the tool and affect the service life.

Don't add too much paper when chopping at one time, so as to avoid paper jams.

2. Matters needing attention:

1. The shredder does not feed paper

Check if the sensor is working properly. Check that the circuit board is working properly. Check that the motor is working properly.

2. What should I do if the paper shredder jams?

If there is a reverse function, try the reverse key first to see if it can exit by itself. If it doesn't work, cut off the power, then pull out the shredded paper part and turn it over for a few time, then turn it on again. Remember to turn off the power to operate! If it still doesn't work, you can try to use a screwdriver to get rid of some shredded paper while turning it upside down.

3. Paper cannot be shredded, but the sound of the motor running is abnormal when the switch is turned on?

This is a problem with the transmission system of the paper shredder, and it should be sent to the designated manufacturer for repair within the warranty period.

4. The paper shredder is not powered on

Please check whether the power supply is connected properly. Please check if the switch is turned on. Check whether the fuse is broken down. Check the circuit board for breakdown. Check that the trash can be put away.

5. The paper shredder makes abnormal noise

Please check whether the tool is damaged. Please check whether there is too much shredded paper, which will affect the normal operation of the cutter. Check whether the belt is loose (there are belts in some old models) and check whether the whole machine swings when it is charged.

6. Is there radiation when the paper shredder is working?

There is electromagnetic radiation. But paper shredders use low-voltage electricity, which belongs to low-frequency radiation, so the electric field strength is very small and can be ignored. After it is powered on, the motor drives the blade to rotate to break the paper. It has the same principle as the soybean milk machine we usually use. Ordinary electrical appliances use motors to generate electricity, and its frequency band is generally maintained at around Hz, and at most it will not exceed Hz. It is difficult for this part of household appliances to radiate electromagnetic waves. But we do not rule out those electrical appliances that consume a lot of power. They may use electric frequency technology, which may generate hundreds of gigabytes of electromagnetic fields in an instant, which may generate electromagnetic radiation. The most common home appliances of this kind are air conditioners, but now many air conditioners use frequency conversion technology, so it is not possible for them to generate huge electromagnetic radiation all the time. have a direct impact. Pay attention to the distance between the human body and office equipment, and keep a certain safe distance when using it. The farther away from electrical appliances, the smaller the damage from electromagnetic waves.

After browsing so many methods, we should have a certain understanding of how to use the shredder. In fact, its use is not difficult, nor is it easy to master. All we need is that we have the patience to learn about these methods. I think everyone can master these methods now, so I hope that everyone can use shredders more efficiently in the future workplace.